Raco AlarmAgent.com AA-102DC, Installation Manual

Page: 22 / 43

21
A special caution about using cell phones to assess signal strength…
While any cell phone can be used to assess whether a separately located “outside the
building” antenna is required as described above, a cell phone cannot be relied upon
to assess the need for an externally mounted antenna. This is because the
AlarmAgent
TM
RTU may use a different network type than your cell phone uses. The
LED bar graph on the AlarmAgent TM RTU is the proper reference for signal strength.
Appendix B: Signal Input wiring for each Application
Template
NOTES:

Dry (non-powered) contact inputs only!

Pump Inputs require Closed Contact (pump is running).

Pump 1 Input: Closed when Pump 1 runs.