background image

IMPORTANT!  

We are committed to the highest quality in the manufacture of this 

RACK IT UP! 

pot rack.  The components of 

each rack are carefully inspected before shipment. 

 

However, in case there is a problem, PLEASE LET US HELP YOU FIRST.  Do not return the item to where you 
purchased it.  First, call us and explain what is missing or wrong.  We will do our best to help with any question or 
problem you have—and as fast as possible. 

 

Call us TOLL FREE 1 (877) 362-5863 and ask for customer service.  Thank you! 

 

TOOLS NEEDED 

-  

 We provide all tools required for assembly: hex wrench, fastener hardware (nuts, bolts).  

 Note under attaching instructions on page 3 of this booklet, the list of tools you will need to provide.

 

RACK IT UP! 1-Year Limited Warranty 

This product is warranted to be free of material defects for a period of one year from the date of purchase. Your exclusive 
remedy is the repair or replacement of the defective product, and shall be subject to the following conditions: (1) You send a 
notice of any defect to RACK IT UP! within the warranty period, and (2) You return the defective product, to RACK IT UP!, 
24 Colwell Street, Port Hadlock, WA 98339,  

postage prepaid,

 within 

20

 days following receiving a return authorization num-

ber.  (A return authorization number may be obtained from RACK IT UP! by calling the number at the bottom of this booklet.) 
There are no other warranties expressed or implied. There are no warranties of merchantability or fitness for a particular 
purpose. RACK IT UP! specifically disclaims any and all incidental or consequential damages arising out of purchase, instal-
lation or use of this product.

 

 

RACK IT UP! 

™ is a trademarked brand  -   All rights reserved

 

Bookshelf Pot Rack 

With Wood Shelf 

With Grid

 

Model MPE 15 

Summary of Contents for MPE 15

Page 1: ...o be free of material defects for a period of one year from the date of purchase Your exclusive remedy is the repair or replacement of the defective product and shall be subject to the following conditions 1 You send a notice of any defect to RACK IT UP within the warranty period and 2 You return the defective product to RACK IT UP 24 Colwell Street Port Hadlock WA 98339 postage prepaid within 20 ...

Page 2: ...e powder coat finish applied at the factory also adheres to the inside of bolt holes pushing a bolt through it during assembly may be difficult Therefore before connecting parts we recommend that you check to see that bolts slip easily through all holes If they do not carefully clear paint from holes in side bars ends and arms using a small knife SECOND be certain that barrel nuts and bolts screw ...

Page 3: ...need level tape measure pencil electric drill and and 1 8 drill bits hammer and nail STEP 1 LOCATION Decide where you want to place your pot rack Consider the height of the wall where the pot rack will hang keeping in mind how far below the rack your pots and utensils will hang plus how high above your head you can still easily reach cookbooks etc stored on the grid On the wall mark the four point...

Page 4: ...th drywall surface 3 Bend straps at wall by pushing side to side snapping off straps level with flange of cap 4 Repeat for other anchor point at top of rack arm 5 Install the LOWER red sleeve anchors Using an electric drill with 5 16 bit drill a hole at each of the LOWER marks With your ham mer gently tap a red wall screw sleeve 30B into each hole until it is flush with the drywall surface 6 At th...

Reviews: