910210 - Battery Powered
D-Handle Impact Wrench
racinerailroad.com
racinerailroad.co.uk
6.2023 Rev. 1
Original Instructions
© 2023 Racine Railroad Products
Page
12
of
18
Powering On the Wrench
1. Press the battery power switch to ON.
The Boot LED will light up red, indicating
the default gear (6
th
).
.
2. Press the Change-Over switch to adjust the direction
3. Press the
buttons on the control panel to adjust the desired torque.
4. Press the Safety Switch.
•
The Boot LED will light up green.
5. Press the Start button. Check the following:
•
forward and reverse action are functioning correctly.
F indicates tightening. R indicates loosening.
•
if there is abnormal noise.
•
if all actions are working correctly.
Note
: The forward and reverse action cannot be adjusted without turning on the safety
switch.
