-3-
-4-
ASSEMBLY OPERATING
INSTRUCTIONS
Before carrying out any assembly or disassembly of the unit please ensure that the unit is not
connected to the electrical supply.
Assembling your machine
1. Connect the high pressure connection hose (11) to the high pressure outlet (5) as shown in
Fig.1.
2. Connect the trigger gun (10) to the high pressure hose using a 17mm spanner (not supplied)
Fig.2.
3. Fit the adjustable lance (8) to the trigger gun by locating the lugs and pushing in, then turn
clockwise to lock in position.
4. Connect your garden hose to the quick fit connector using a standard female hose connector
(not provided) Fig.3.
Note: Do not fit lances when the power is on.
WARNING: Do not adjust the nozzle while
the trigger is squeezed.
The pressure of the spray on the surface
you are cleaning increases as you move
the nozzle closer to the surface. We
recommend that for most cleaning
applications a 45
o
spray angle should be
used to avoid damaging the surface being
cleaned. Spraying directly head-on tends to
cause dirt particles to embed in the surface.
The turbo lance is a fixed nozzle, which
effectively increases the area of the high
pressure water jet and decreases the time
required to clean larger areas like patios.
The turbo nozzle provides a circular water
pattern as it sprays high-pressure water. The
spray pattern on this nozzle is not adjustable.
The circular spray action does heavy cleaning
in less time.
The spray is adjustable from a pencil jet to a
fan by turning the nozzle as shown (Fig 6).
a) With the unit fully assembled, ensure that
the unit is switched OFF and is connected to
the mains supply and the water supply. Pull
the trigger a few times to expel any air trapped
in the system.
b) Ensuring that the trigger is released, turn
control switch to 'ON Pressure Washer'
position. The unit is now ready to operate by
pulling the trigger.
Note:
The motor only runs when the trigger is
operated.
When the pressure washer is not in use,
actuate the gun lock for safety reasons (Fig 5).
Switch the unit OFF when not in use for
extended periods of time.
Never operate the pressure washer without
the water supply connected and turned on.
Note:
Before connecting to the mains power supply
please ensure that the control switch is in the
off position (Fig.4) and the water supply is
connected and is turned on.
Running the pressure washer without any
water supplied to it will damage the pump.
Instructions for use
Helpful Hints
Before using remove any objects which could
create a hazard.
Ensure that all doors and windows are closed
(where appropriate).
The adjustable lance allows you to use a
variety of spray patterns from a fan to a pencil
jet (Fig 6). When using the pressure
washer to clean decking, patios, vehicles, etc.,
always start by using the fan spray. Begin
spraying at an angle of 45° and from a minimum
of 30cm away to avoid damaging the surface of
the material to be cleaned.
Fig 1
Fig 2
Fig 3
Fig 6
Fig 4
Fig 5
LOCK
OFF
