-1-
-2-
SECTION 1 - PRESSURE WASHER
COMPONENTS
SAFETY AND WARNING INFORMATION
General Safety Rules
WARNING: Read the instructions fully before using the product for the first time. Failure
to follow the instructions may result in fire, electric shock and or serious injury.
We recommend the user wears safety equipment during use.
We recommend the product be used with a RCD (Residual Current Device).
Please Retain These Instructions For Future Use And Referral
• This unit must not be used by children or untrained personnel.
• When operating the unit in high pressure mode the lance may cause kickback. Therefore
please ensure that you hold the spray gun firmly. When using the unit we recommend that
other people are at least 10m away from the working area.
• High-pressure jets can be dangerous if misused. The jet MUST NOT be directed at yourself,
other people, animals, live electrical equipment or the pressure washer itself. The trigger gun
safety lock prevents the trigger from accidentally being engaged. This safety feature does not
lock trigger in the ‘on’ position.
• Do not use the pressure washer if the supply cord or other important parts are damaged
(e.g. high pressure lance or hoses). Never carry your pressure washer by the cord.
• Do not disconnect the high-pressure hose whilst the system is under pressure. This system is
capable of producing 1500PSI. To avoid rupture and injury, do not operate this pump with
components rated less than 1500PSI working pressue (including but not limited to spray guns,
hose and hose connections.)
• Do not use acids or flammable liquids in the machine.
• When using a pressure washer always ensure that your water connection is protected by a
backflow preventer (as per water byelaws). This will avoid possible contamination of your water
supply. Use cold water feed only.
• Protect the unit against freezing, avoid storing the machine where it may be susceptible to frost.
• Prior to starting the pressure washer in cold weather, be sure ice has not formed in any part of
the equipment.
• The unit must continuously run with water. Dry running will cause serious damage to the seals.
IMPORTANT:
The pressure washer is equipped with an auto stop device. When the trigger is
released it will open the power circuit to the motor and cause the pressure washer motor to
stop. The motor will resume when the trigger is pulled. The pressure washer is also equipped with a
main power ON/OFF switch located on the unit. It should always be moved to OFF position when
the pressure washer is not being used.
This product is a class II product-double insulated. No means of grounding (to earth) is provided
on this product nor should it be added. Only a qualified person should carry out servicing.
If an extension lead is to be used with this product, please ensure:
Use only extension cords that are intended for outdoor use.
Completely unwind the cable from the drum to allow for full current rating of the extension cable.
To reduce the risk of electrocution, keep all connections dry and off the ground.
Do not touch plug with wet hands
Hose: Water supply hose must be at least ½" in diameter with a minimum recommended length of
7.5 meters and be fitted with a suitable coupling that matches the male quick fit connector.
Use only original spare parts from the manufacturer or approved by the manufacturer.
• WARNING: High pressure hoses, fittings and couplings are important for the safety of the appliance.
• Use only hoses, fittings and couplings recommended by the manufacturer
Component List
Technical specification
1. Detergent containers
2. Water supply inlet
3. Control switch
4. Detergent supply switch
5. High pressure outlet
6. Rotary brush
7. Fixed brush
8. Adjustable lance
9. Turbo lance
10. Trigger gun
11. High pressure hose
12. Vac socket
13. Wet & dry vac
14. Quick fit connector (pre-fitted)
15. Cleaning needle
Rated voltage:
Rated power
Rated frequency
Protection class
Degree of protection
Permissible pressure
Rated pressure
Supply water temperature
Min supply flow rate
Nozzle spray angle
Max output flow rate
220-240V AC
1800 Watt
50 Hz
Class I
IPX5
150 Bar / 15 Mpa
100 Bar / 10 Mpa
0 - 40 °C
10.0L/min
0-60 degrees
5.0L/min
Cable length
Hose length
Noise Value
Noise Value
5m
5m
96 Lwa
92 Lpa
1
2
4
3
7
6
8
10
11
12
13
5
9
14
15
