Rabbit Coyote BL2500, User Manual

Page: 58 / 107

52 Coyote (BL2500)
Reads the calibration constants, gain, and offset for an input based on its designated channel code
position into global table _adcCalibS . Use the sample program USERBLOCK_INFO.C in
SAMPLES\USERBLOCK to get the addresses reserved for the calibration data constants and the
addresses available for use in your program.
NOTE: This function cannot be run in RAM.
PARAMETERS
channel
is 0 for channel AD0
RETURN VALUE
0 if successful
-1 if invalid address or range
SEE ALSO
anaInEEWr, anaInCalib
Writes the calibration constants, gain, and offset for an input based on its designated channel code
position into global table
_adcCalibS
. Use the sample program
USERBLOCK_INFO.C
in
SAMPLES\USERBLOCK to get the addresses reserved for the calibration data constants and the
addresses available for use in your program.
NOTE: This function cannot be run in RAM.
PARAMETER
channel
is 0 for channel AD0
RETURN VALUE
0 if successful
-1 if invalid address or range
SEE ALSO
anaInEERd, anaInCalib
int anaInEERd(unsigned int channel);
int anaInEEWr(unsigned int channel);