Rabbit BL2600, User Manual

Page: 53 / 116

User’s Manual 47
•
NFLASH_ERASE.C
—This program is a utility to erase all the good blocks on a NAND
flash chip. When the program starts running, it attempts to initialize the NAND flash
chip selected by the user. If the initialization is successful, the progress in erasing the
blocks is displayed in the Dynamic C
STDIO window.
4.2.8 Real-Time Clock
If you plan to use the real-time clock functionality in your application, you will need to set
the real-time clock. You may set the real-time clock using the
SETRTCKB.C
sample pro-
gram from the Dynamic C
SAMPLES\RTCLOCK
folder. The
RTC_TEST.C
sample pro-
gram in the Dynamic C
SAMPLES\RTCLOCK
folder provides additional examples of how
to read and set the real-time clock
4.2.9 TCP/IP Sample Programs
TCP/IP sample programs are described in Chapter 5.
4.3 BL2600 Libraries
Two library directories provide libraries of function calls that are used to develop applica-
tions for the BL2600.
•
BL2600
—libraries associated with features specific to the BL2600. The functions in the
BL26xx.LIB
library are described in Section 4.4, “BL2600 Function Calls.”
•
RN_CFG_BL26.LIB
—used to configure the BL2600 for use with RabbitNet peripheral
boards.
•
TCPIP
—libraries specific to using TCP/IP functions on the BL2600. Further informa-
tion about TCP/IP is provided in Chapter 5, “Using the TCP/IP Features.”