manualshive.com logo in svg

RAB STL360HB/L, Instructions Manual, Page: 9 / 9

Share
Download
RAB STL360HB/L Instructions Manual Download Page 9

INSTRUCTIONS

 

STL360H/L, STL360HB/L INSTALLATION

RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install 

and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]

9

P-100276

Easy Answers

rablighting.com

Visit our website for product info

Tech Help Line

Call our experts: 888 722-1000

e-mail

Answered promptly - [email protected]

Free Lighting Layouts

Answered online or by request

© 2022 RAB LIGHTING Inc.

Northvale, New Jersey 07647 USA

RAB WARRANTY:

 RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty        

PATENT:

 Patent information can be found at rablighting.com/ip

CONTENTS OF ACCESSORY KIT

•  2 Lens Masks 
•  Indoor Switchplate Label 
•  3 Wire Nuts 
•  Adjustment Tool 
•  Mylar lens Mask 

•  Crossbar with Green Ground Screw 
• Hanging Hook 
•  1/2" Close Up Plugs 

(3)

 

•  Slotted Screws 

(4)

 

• Finishing Cap 
•  O-ring Gasket 
• Center Mounting Screw 
•  Metal Surface Mounting Plate with Gasket

Summary of Contents for STL360HB/L










Reviews:

No comments