INSTRUCTIONS
STL360H/L, STL360HB/L INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
2
SETTINGS
How long do the lights stay on?
Lights remain on as long as there is movement within the
protection zone. Once the zone is vacated lights can be adjusted
to remain on approximately 5 seconds up to 12 minutes. Since the
lights are on only when needed, and the sensor uses only one watt.
The Stealth is extremely energy efficient.
Can outdoor lights still be turned on with the light switch?
Yes. STL360 can be controlled by a conventional indoor switch or
circuit breaker. STL360 operates in the auto mode unless changed.
Lights can be turned on or off manually at night only with the
Manual Override Mode.
Wall Switch Manual Override
(to keep lights on)
Flip the switch twice slowly
(off-on-off-on)
within 1-2 seconds. If
you set this during the sensor will become “ready” for the Manual
Override Mode and will start Manual Override at dusk.
Evening Timer
(to keep lights on, and is repeated every night)
Flip the switch three times slowly
(off-on-off-on-off-on)
within 1½ - 3
seconds. You can set this during the day and the Evening Timer
Mode will begin at dusk.
To Resume Automatic Mode
Switch power off for at least 10 seconds, then back on.
Will STL360 detect animals?
STL360 may detect large animals. Having animals trigger the sensor
can give property a “lived-in” look. However, you can limit animal
detection by turning down the sensitivity knob and/or placing the
blinders provided on the lower part of the forward lens.
How do you make adjustments to the sensor?
Use the adjustment tool provided, or a screwdriver with a 1/8" wide
blade. To adjust the controls on the front of the sensor see page 5.
CHOOSING A LOCATION
The best location is where the sensor can “see” all paths of
movement. The sensor may be wall or soffit mounted. As distance
from the sensor increases, larger movement will be required for
detection. For instance, at 10 feet, a half step will be enough, while
at 50 feet several steps will be necessary for detection.
How large an area does STL360 protect?
Two powerful detectors combine to give the STL360 180º x 60' wide
with 60' forward range plus superb 360º downward detection
below and to all sides.
Mounting Height
Mounting at 6 - 10' above the ground allows maximum range. If the
sensor is mounted above 15' high, the usable range is reduced.
Difficult Locations
Sensor may be triggered by unwanted
movement or heat source, such as a swaying
tree, road traffic, dryer vent, swimming pool
or hot tub.
To improve performance in difficult locations:
• Reduce sensitivity by turning the SENS knob counterclockwise
and/or…
• Mask lens in the direction of the unwanted movement or heat
source using the lens mask provided or opaque tape.
TIME
1 8 HRS
5 SECS 12 MINS
– +
EVENING
TIMER
SENS
TIME
1 8 HRS
5 SECS 12 MINS
– +
EVENING
TIMER
SENS
mask
side view
20'
120'
60'
6-10'
10'
60'
6-10'
40'
Reduced Range
Maximum Range
20'