Contents
Lightcloud Controller
Instruction Manual
Wire Nuts
Lock Nut
Gasket
x 3
x 3
POWER MEASUREMENT:
The Lightcloud Controller is capable of
measuring the power usage of the attached circuit.
POWER LOSS DETECTION :
If mains power to the Controller is lost,
the device will detect this and alert the Lightcloud application.
EMERGENCY DEFAULT:
If communication is lost, the Controller may
optionally fall back to a specific state, such as turning the attached
circuit on.
Controller requires constant, unswitched power. Any wires not in use
must be capped off or otherwise insulated. This product should
only be installed by a qualified electrician and in compliance
with local and national electrical codes.
!
Specifications
PART NUMBER
LCCONTROL/MINI
INPUT
120V-277VAC, 60Hz
<0.8W (Standby and Active)
MAXIMUM SWITCHED LOAD RATINGS
For Control of Electronic Ballast (LED)
and Magnetic Ballast
Electronic/Tungsten: 4.2A @120VAC
Inductive/Resistive: 4.2A @120VAC, 1.8A @277VAC
OPERATING TEMPERATURE
-35ºC to +60ºC
OVERALL DIMENSIONS
1.6" diameter, 3.8" length
1/2" NPT Mount, Male
22AWG pigtails
18AWG pigtails
WIRELESS RANGE
Class 2
IP66 Rated
Indoor and Outdoor Rated
Wet and Damp Location
Plenum Rated
Line-of-Sight: 1000 feet
Obstructions: 100 feet
Summary of Contents for Lightcloud Controller Mini
Page 2: ......