INSTRUCTIONS
FIELD-ADJUSTABLE TOMO™ INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
1. Secure
Surface Mounting Plate
to Junction Box
(by others)
.
(Additional attachment to the ceiling may be needed
for longer fixtures).
8ft
TOMO
includes a 2nd
Surface
Mounting Plate
and
Surface Mount Adapter Plate
(see Fig. 2)
.
2. Remove
Silicone Plugs
located on each end of the
Housing
Cover
as shown in Fig. 2
(do not discard Silicone Plugs)
.
3. Pull the
End Caps
out of each end of the fixture as shown
in Fig. 1. Separate the
Housing Cover
from the
Lens and
Tray Assembly
by sliding the
Housing Cover
either right of
left to unlock from
Key Slots
as shown in Fig. 3
.
Pre-installed
Tether Cables
(2)
will prevent
Lens and Tray Assembly
from
separating from
Housing Cover
(Fig. 1).
4. Pull supply wires from Junction Box
(by others)
through
center of
Surface Mounting Plate.
Use appropriate UL
rated wire connectors as required by NEC and local code
to make electrical splices to fixture leads.
5. Align S
urface
Mount Adapter Plate
to the
Housing Cover
.
Using
(4)
Screws
(provided)
secure
Surface Mount Adaptor
Plate
and
Housing Cover
to the
Surface Mounting
Plate.
6. Follow appropriate wiring instructions per code (Fig. 12).
7. Push
Lens and Tray Assembly
into the
Housing Cover
.
Align
Keys
into
Key Slots
and slide to the right or left to
lock the
Housing Cover
into the
Lens and Tray Assembly
.
Snap on
End Caps
and insert
Silicone Plugs
into
Housing
Cover
.
WARNING: To prevent wiring damage or abrasion, do
not expose wiring to edges of sharp objects.
TOMO- 2FT
End Cap
(2)
Surface Mounting Plate
Housing Cover
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
The fixture is suitable for indoor applications. Suitable for damp locations. Ceiling, Canopy and Pendant mount only.
SURFACE MOUNTING
Fig: 1
TOMO- 4FT
TOMO- 8FT
Surface Mount Adapter Plate
Lens and Tray Assembly
Screws
(4)
Tether Cable
(2)
Lens and Tray Assembly
Key Slot
Housing Cover
Surface Mount Adapter Plate
Fig: 2
Fig: 3
Power Cord Knockout
Cable Coupler Knockout
Silicone Plugs
(2)