6
BA_BM_HS-200_EN_43-21.docx
3
General
The operating manual must be read carefully and understood before handling the
lift table! If anything is unclear, please contact the manufacturer.
The HS 200 lightweight scissor lift table has been specially designed for use outside the company, for example
by service technicians, fitters or craftsmen. Due to its low weight and compact design, it can be quickly and
easily stowed in the service vehicle.
It is therefore suitable for countless applications in industry and trade, e.g. for maintenance, assembly and
repair work in refrigeration industry. The basic model is already equipped with an aluminium table top. Further
table tops are optionally available. These can be plugged onto the substructure and allow individual adaptation
to different applications.
3.1
Advantages
•
Mobile lightweight aluminium construction with high load-bearing capacity
•
Ideal for service applications thanks to light weight and compact design
•
Uniform adjustment to height, even under uneven load distribution
•
Back-friendly, foot-operated hydraulic height adjustment
•
High-quality, side-mounted hydraulic unit
•
Flexible and versatile applications
3.2
Applications
HS 200 can be used for all work corresponding to its intended use in section
4.2. The lift table is suitable for
use as work equipment for transporting, lifting and lowering loads and also as a height-adjustable assembly
table. Typical areas of application are workplaces in manufacturing, assembly and maintenance, where precise
height adjustment for ergonomic working as well as high flexibility and mobility are of particular importance.
The lift table must not be used for work that does not correspond to its intended use (see section
4.2).
3.3
Target Group and Previous Experience
This operating manual is intended for the operating and maintenance personnel of the lift table. The operating
personnel is to be determined by the operator and must further meet the following requirements:
•
Basic technical and mechanical knowledge as well as knowledge of the associated technical terms
•
Reading and understanding these operating and maintenance instructions
In order to acquire the knowledge required to operate this lift table, the operator must ensure the following
measures:
•
Product training for every operator (also possible external personnel)
•
Regular safety instruction
3.4
Requirements for the Operators
The operator is responsible for the safe use of the lift table!
The lift table may only be operated by trained personnel who have also read this manual.
Inspection, maintenance, cleaning and repair may only be performed by technical specialists
with product-specific training and mechanical and/or electrical training.
Specialists with product-specific training are to be commissioned and held responsible for
planning and checking the work.
The national protective regulations for employees must be observed
The legal minimum age must be observed.
