R. Beck Maschinenbau HS 1000 FH, Operating Manual

Page: 13 / 31

13
BA_BM_HS-1000_EN-45-21.docx
5 Technical Specifications
Lift Table Type HS 1000 | FH HS 1000 | AH
Article number 193.500.00 193.500.00 + 193.600.00
Special feature - foot-hydraulic height adjustment
- with push-handle - battery-hydraulic height adjustment
- with push-handle
Table top 5 mm thick metal sheet 5 mm thick metal sheet
Support frame dimensions 1 1600 x 900 mm 1600 x 900 mm
Total height 2 1150 mm 1150 mm
Effective stroke 700 mm 700 mm
Height (without table top) 450 mm 450 mm
Height adjustment hydraulically hydraulically
Control element for height foot pedal push button unit (removable)
Swivel castors / fixed castors 2 each, ball bearing mounted (Ø 150 mm) 2 each, ball bearing mounted (Ø 150 mm)
Parking brakes 2 pieces (attached to cross side) 2 pieces (attached to cross side)
Load capacity / lifting capacity max. 1000 kg max. 1000 kg
Total stroke reached after approx. 100 pumping operations approx. 7 s Key actuation
Net weight 2 approx. 250 kg approx. 295 kg
Hydraulic power units 1 x lateral 1 x lateral
Battery technology - Lead gel, maintenance-free
Battery output voltage - 12 VDC
Battery capacity - 26 Ah
Battery operating temperature - -15 … +40° C
Battery charger manufacturer - CTEK (manual see

13.1)
Battery charger connection -
230 VAC / 50 Hz
(European standard connector)
5.1 Manufacturer and Nameplate
Manufacturer:
Reinhold Beck Maschinenbau GmbH
Im Grund 23
DE-72505 Krauchenwies (Germany)
Phone: +49 (0) 7576 / 962 978 - 0
Fax: +49 (0) 7576 / 962 978 - 90
Email: info@beck-maschinenbau.de
Nameplate:
The nameplate provides information about the characteristic values of
your lift table:
Figure 2: Nameplate
Note: Before using the unit in a way that deviates from the described suitability (see section

4.2), it is essential
to consult the manufacturer. Otherwise all warranty, liability and other claims for damages of the operator
against the manufacturer will be voided!
1
With standard sheet metal table top (optionally “ Beech-Multiplex ” = 1.700 x 1.000 x 30 mm, see

16).
2
Specification refers to the basic model with standard metal sheet table top.