© Copyright Qvis ®. All documentation rights reserved.
52
3.16 SCAN
INFORMATION
CAMERA
IMAGE
[ MOTION ]
RESTART
DEFAULT
EXIT
MAIN MENU
[ SCAN ]
SEQUENCE
PATTERN
BACK
EXIT
MOTION
[SCAN No. 1]
SCAN SPEED 14
LEFT LIMIT SET
RIGHT LIMIT SET
SCAN START
BACK
EXIT
SCAN
Auto scan function is for repeated
automated camera movement; it can
support up to 8 auto scan path groups.
Setting method is as follows:
1. Set scan number:
Click
up/down to scan number, click
left/right to set number setting
model, click up/down for next
step.
2. Set scan speed:
Click up/down
to highlight
‘scan speed’, click
left/right to enter scan speed
setting, click left/right to choose
speed between1-100, click
up/down to continue to next step.
3. Set left boundary:
Click
up/down to set left boundary
setting, click left/right to enter
right boundary setting, user can
control the device to desired
position then click focus. The
present position is recorded as
the left boundary.
4. Set right boundary:
Click
up/down to set right boundary
setting, click left/right to set
boundary setting mode, user can
control device to desired
position, then click focus. Then
present position is recorded as
the right boundary.
5. Enable scan:
Click up/down to
Scan Start, click left/right to start
corresponding scan number of
the newly setup scan.