© Copyright Qvis ®. All documentation rights reserved.
Do not allow the water and other liquid to penetrate into the device if casing has been
compromised. This series product complies with the IP66 standard specified in the
Degrees of Protection Provided by Enclosure.
Ensure lightning surge protection is in place to make sure you fully protect camera
circuitry from electrical overload.
Please make sure the CCD (CMOS) component is away from the radiation of the
laser beam device. Otherwise it may result in CCD (CMOS) optical component
damage.
It is recommended that the grounding studs of the product should be grounded, so to
further enhance the reliability of the camera.
Avoid shooting very bright objects directly into
the camera’s CCD (such as the sun or
light fittings), and avoid fixating the camera lens on bright static object for long time,
as it will cause Irreparable damage to the camera’s CCD.
6.
Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any
maintenance work.
Do not touch the CCD (CMOS) optic component. Please use an air jet to clean the
dust off the lens surface.
You can use the dry cloth with some alcohol or mild
detergent to clear if necessary.
When the camera is not in use please put the dustproof cap to protect the CCD
(CMOS) component.
Do not use volatile solvent such as the benzene, paint thinner or detergent with the
ability to abrade surfaces. It may result in lens damage or adversely affect the
device
’s performance.
7.
Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are
included. Contact your local retailer/vendor ASAP if something is missing.
