© Copyright Qvis ®. All documentation rights reserved.
42
3.6 ALARM
INFORMATION
[ CAMERA ]
IMAGE
MOTION
RESTART
DEFAULT
EXIT
MAIN MENU
LANGUAGE
IR LED
IDLE
MASK
[ ALARM ]
PTZ DISPLAY
BACK
EXIT
CAMERA
INPUT
MODE
N/O
ALARM MODE OFF
ACTION OFF
ALARM OUT OFF
RESET DELAY 30SEC
BACK
EXIT
ALARM
Camera supports up to 7 alarms in and 1 alarm out.
Device can receive an alarm signal which could
trigger an auto function (e.g. turn to preset, run
pattern path, etc.), at the same time the device can
have an output alarm connection. Alarm function
setting methods are as follows:
1. Input mode:
Click up/down to
‘input mode’,
click left/right to operate
’ input status’
settings. Alarm input status can be set to
either N/O or N/C.
N/O: When channel is closed, it will indicate
that device received a valid signal.
N/C: When channel is open, it indicates that
device received valid alarm signal.
2. Alarm mode:
Click up/down to
‘alarm
mode
’, click left/right to operate setting,
alarm mode: on/off
3. Action:
Click up/down to
‘Action’, click
left/right to set. It is used to set a preset
alarm channel and to check if camera is
linked to operate via a special function, e.g.
preset 2 or off.
4. Alarm Out:
Click up/down to ‘Alarm out’,
click left/right to set, Click up/down to
operate alarm output channel choice; alarm
input can be set to either on/off.
5. Reset Delay:
Click up/down to
‘Reset
delay
’, click left/right to set, when alarm
occurs on the present channel, if there is a
linked alarm output, the alarm output switch
will close. Reset delay indicates period from
the time camera detects the alarm signal to
when it resets. Time options include either:
30sec, 1min, 5min, and 10min.