®
RANGE
CORTEX NVR
INSTALLER’S QUICK SETUP GUIDE
For full instructions see the Users Guide found on the USB pen drive provided with the NVR
More detailed instructions on how to operate
your NVR are included in the Quick Users Guide,
which is on the setup USB pen drive included.
We refrain from printing these large manuals in
an effort to limit our impact on the environment.
BEFORE INSTALLING ANYTHING WE STRONGLY RECOMMEND THAT YOU CONNECT YOUR CAMERAS TO YOUR DVR AND TEST YOUR
SYSTEM FIRST. WE CHECK EVERYTHING TO MAKE SURE IT IS WORKING WHEN IT LEAVES US BUT VERY OCCASIONALLY THINGS FAIL AND
IT IS BETTER TO KNOW NOW THAN AFTER YOU HAVE FITTED EVERYTHING!
NVR Power
Cortex NVR
1. DEVICE CONNECTIONS
STILL NEED HELP?
Then speak to our engaging technical team via our
webchat service found upon our website:
www.adata.co.uk
or if you prefer to call:
(023) 92488302
Look for this webchat
bubble on our website
to connect to one of
our technical team
members.
Output to TV or Monitor
Power Adaptor
HDMI/VGA/RCA
Connect the
mouse to the
USB socket
1.
3.
Ethernet Connection
IP Camera
PoE Switch
Ethernet connector
to POE Switch
POE Switch
to NVR
2.
Connect camera’s
ethernet port to ethernet
cable.
Power Adaptor
Power to
POE Switch
Connect camera to POE
switch to provide camera
with power.
4.
Complete Connection
Setup
Connect peripheral
devices to NVR and
provide power.
Connect POE Switch to
ethernet port at the rear
of the NVR.
Ethernet Connection