Qvis 72-8P Series User Manual Download Page 228

Page: 228 / 233

219

5. Real-time video color is distorted.

These are the following possibilities:



When using the BNC output, the NTSC and PAL setup may not be correct. The real-time

video will become black and white.



Device and monitor resistance is not compatible.



Video transmission is too long or degrading is too huge.



Device color or brightness setup is not correct.

6. I cannot search local records.

These are the following possibilities:



HDD internal disk is damaged.



HDD is broken.



Upgraded program is not compatible.



The recorded file has been overwritten.



Record function has been disabled.

7. Video is distorted when searching local records.

These are the following possibilities:



Video quality setup is too low.



Program read error, bit data is too small. If there is mosaic in the full screen, please

restart the device to solve this problem.



HDD internal disk error.



HDD malfunction.



Device hardware malfunctions.

8. There is no audio when monitoring.

These are the following possibilities:



This is not a power picker.



It does not have powered acoustics.



Audio cable is damaged.



Device hardware malfunctions.

9. There is audio when monitoring but there is no audio when system playback.

These are the following possibilities:



Setup is not correct. Please enable audio function.



Corresponding channel has no video input. Playback is not continuous when the screen

is blue.

Summary of Contents for 72-8P Series










































































































































































































































Search results

Summary of Contents for 72-8P Series

Reviews:

Related manuals for 72-8P Series

Brands by name

Popular brands

Qvis 72-8P Series, User Manual

Search results

Summary of Contents for 72-8P Series

Reviews:

Related manuals for 72-8P Series

Brands by name

Popular brands