Q150T Sample Preparation System
Q150T - Instruction Manual
51
10473 - Issue 5
6.4
Film Thickness Monitor
To view the status of the Film Thickness Monitor (FTM), select
Service | FTM
from the
menu bar. The FTM Status window is displayed (see
Figure 6-10
).
This shows the percentage of the crystal used and will help you decide when to replace it
(see page 68).
Figure 6-10.
FTM Status
6.5
Setting the Date and Time
To adjust the Q150T’s clock, select
Service | Set Time
from the menu bar. The Set
Date Time dialog box is displayed (see
Figure 6-11
).
To change any of the numerical fields, tap in the box and then select the correct value
using the displayed keypad. Tap on the
OK
button to confirm the changes or on the
Cancel
button to discard them.
Figure 6-11.
Setting the date and time
Summary of Contents for Q150T S
Page 92: ......
