32
Registration
QUORiON Data Systems GmbH
INViCTUS
Registration
This chapter provides information on the basic operation of your POS system. By default, the
POS system is in registration mode. Registration mode is used to record registrations with
the POS system.
Signing In/Off Clerk
Before a sales transaction can be started, a
clerk must be signed in to the POS system.
A clerk is signed in by entering a password
or by dallas key.
Signing In/Off Clerk via password
To sign in a clerk via password entry, pro-
ceed as follows:
Procedure:
1.
Press the button
Clerk
and select the
desired clerk.
The message
„Enter Code“
is dis-
played.
2.
Enter the password by using the
num-
ber buttons
.
HINT
In the standard configuration, the pass
-
word corresponds to the clerk num-
ber. This password should be pro-
grammed individually for each clerk. .
3.
Press the button
Clerk
.
The clerk is displayed.
The clerk is signed in properly.
To sign off a clerk via password entry, pro-
ceed as follows:
Procedure:
1.
Press the number button
0
.
2.
Press the button
Clerk
.
The message "E13-Select Clerk" is
displayed.
The clerk is signed off properly.
Signing In/Off Clerk via dallas key
To sign in a clerk via dallas key, proceed as
follows:
Procedure:
Plug the dallas key onto the dallas lock.
The clerk is signed in properly.
HINT
To sign in or sign off a clerk with the dallas
key, a dallas key must be programmed for
this clerk first
To sign off a clerk via dallas key, proceed as
follows:
Procedure:
Remove the dallas key from the dallas
lock.
The clerk off signed in properly.
