Tenor
AS MultiPath Switch
Intelligent VoIP Access Solutions for remote offices and SOHO environments
* Available for an additional cost
Tenor S (Survivable MultiPath Switch)
Offers a Survivable Branch Office VoIP
Access Solution for IP PBXs and IP Centrex
Quintum's Tenor S line is a complete SIP-based VoIP solution
for the branch office or for service provider customer premise
equipment, providing full survivability in the event that access
to the central and/or hosted IP PBX is lost. Because it delivers
a complete solution in a single device - and because it offers
such easy, scalable implementation and management - the
Tenor S line significantly reduces the total lifecycle cost of VoIP
deployment, while optimizing service reliability. Tenor S also
offers PSTN connectivity and legacy equipment integration for
both analog and modem based devices.
The Tenor VoIP MultiPath Switch
Offers a Robust VoIP Switching Solution
For Remote Offices and SOHO Environments
Quintum's Tenor switching/gateway solutions are deployed
worldwide to provide highly reliable, easy-to-implement VoIP
connectivity in a full range of enterprise and service provider
environments. These highly adaptable solutions work with
traditional PBXs, legacy analog equipment, IP PBXs and IP
phones, IVR and ACD systems, RADIUS servers, and other
critical components of end-to-end H.323- and SIP-based
communications environments. They are perfect for deploying
VoIP in small enterprises, SOHO or remote offices of larger
enterprises, where analog and modem-based devices are
common.
Both versions of Tenor still include the features that made Quintum the VoIP market value leader.
• MultiPath architecture
for easy integration with existing voice and data infrastructure, meaning little or no re-programming
of the PBX, or upgrades are required and no need for special dialing plans.
• Transparent MultiPath Call Routing
to intelligently route calls between the PBX, the PSTN, and the IP network to achieve
the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently
"hop off" to the PSTN, to reach off-net locations.
• PacketSaver™ Technology
multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets
from multiple calls into a single packet.
• Universal Dial Plan
that provides a programmable dial plan so Tenor can be integrated into any network environment
• NAT
Access
™ to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses
when a VoIP call is established with an outside party.
•
Remote Management
for anywhere, anytime remote management even behind NAT firewalls with Quintum's Remote
Management Session Server.
Tenor and Tenor S now assure that VoIP can be deployed easily in existing voice and data networks, offering unmatched voice
quality and survivability, network-wide scalability, and easy, secure remote management for installation, configuration, upgrades,
troubleshooting and repair. All this adds up to lower TCO than any other VoIP solution on the market!
• 2 or 4 Analog line and trunk interfaces
• Up to 4 simultaneous VoIP calls
• Available in MultiPath or Gateway configurations
• Support for external Quintum Tenor Monitor
• Support for external Remote Management Session Server*
