MedTrack Rehabilitation Treadmills User Guide
Controls, Displays, Indicators D-7
Enter Time LED is flashing. You can enter any number of
minutes from 1:00 to 96:00 in one-minute increments. The
clock will count down to zero from that value. When the time
runs out, the treadmill will slow to minimum speed. If you do
not enter a time, the clock will count up from zero when you
press
Start Belt
.
Multifunction
The LEDs adjacent to the multifunction display indicate
which parameter is currently selected: Time, Distance, Pace,
Calories, Calories/min, METS, or Scan.
Units
The adjacent LEDs for MPH or KM/H light up to indicate
which unit of measurement is selected: MPH indicates
English, KM/H indicates metric.
