MedTrack Rehabilitation Treadmills User Guide
Operating the Treadmill 2-3
Five-minute Auto Reset
If you do not use the treadmill within five minutes after
entering the weight and exercise time or within five minutes
after pressing
Stop Belt
, the controller automatically resets the
elapsed time and distance to zero and prompts you to enter
the weight.
Limited-Access Control
A limited-access control lets you restrict treadmill use to
authorized personnel. It also lets you stop the treadmill
quickly in an emergency. The invisible, magnetically-
activated control is located behind the magnet logo on the
bottom left side of the controller.
Activation
The treadmill ships from the factory with the limit-access
control deactivated. Anyone can turn on the treadmill. To
activate the control, place the magnetic key supplied with the
treadmill precisely over the magnet logo on the front panel of
the controller. The magnet will activate the control.
Magnetic Key Placed Over Logo
Once the control is activated, the treadmill will not start, nor
will the displays light up, unless the magnetic key is on the
logo. If you remove the key, the belt will stop, the
Start Belt
and
Grade
keys will be disabled, and the word “SAFE” will
appear in the center display. Accumulated values will remain
on display until you turn off the power.
Magnetic
Key
