MedTrack CR60 Rehabilitation Treadmill Service Manual
Preventative Maintenance 5-1
5
Preventative Maintenance
Warning! Before working on the treadmill or its components, turn off
the treadmill circuit breaker and unplug the power cords.
High voltages remain under the treadmill hood for a few
minutes even after the plug has been removed.
Secure long hair, loose clothing, and jewelry before
working near the treadmill, particularly near the walking
surface or pulleys.
Do not permit anyone to stand on the treadmill belt when it
is started.
Recommended Service
Routine service is necessary every six (6) months. When service is
required, repairs can be done to the modular level.
Routine Maintenance
Visual Inspection
•
Inspect the treadmill power cord for wear. Inspect all connector
cables and the power receptacle. Check for worn or damaged plastic
coverings, frayed or broken wires, cracked connections, and other
signs of damage.
•
Inspect the walking belt for wear. Be sure it is not rubbing against the
frame. The belt should be centered within 0.25 inch of the sides;
adjust if necessary.
•
Check optional siderails to be sure they are fastened securely.
•
Remove potential hazards from the treadmill area.
