Quincy QSV 2200, Instruction Manual

Page: 84 / 124

Section VIII – Maintenance
84 Quincy Vacuum Pump-QSV Series
Maintenance
7.1 Preventive maintenance schedule
Control panel
CAUTION!
Before carrying out any maintenance, repair work or adjustments, proceed as follows:

Stop the vacuum pump.

Close the air inlet isolation valve.

Press the emergency stop button (10).

Switch off the voltage.

Vent the vacuum pump by opening the plug located on the cover of the air inlet filter.
For detailed instructions, see section Problem solving.
The operator must apply all relevant Safety precautions
Warranty - Product Liability
Use only authorised parts. Any damage or malfunction caused by the use of unauthorised parts is not
covered by Warranty or Product Liability.
Service kits
For overhauling or carrying out preventive maintenance, service kits are available (see section Service kits).
Service contracts
Quincy offers several types of service contracts, relieving you of all preventive maintenance work. Consult
your Quincy Customer Center.
General
When servicing, replace all removed O-rings and washers.
Intervals
The local Quincy Customer Center may overrule the maintenance schedule, especially the service intervals,
depending on the environmental and working conditions of the vacuum pump.
The longer interval checks must also include the shorter interval checks.
Service plans for vacuum pump with an Airlogic Graphic controller. Besides the daily and 3-monthly checks,
preventive service operations are specified in the schedule below.
Each plan has a programmed time interval at which all service actions belonging to that plan are to be carried
out. When reaching the interval, a message will appear on the screen indicating which service plans are to
be carried out. After servicing, the intervals must be reset, see section Service menu.