quiko QK-CE220CTN, Installation And Operation Manual, Page: 14 / 16

- 1 2 -
This solution is recommended when you want to enter a reserved area in both directions. To enter, transit is allowed by means of a
recognition command while exiting is automatic.
EXIT
When the vehicle is no longer on
loop
S2 the device will move back
up automatically after an adjustable
pause time.
The vehicle approaches the reser-
ved area.
Occupying the coil
S2 activates bol-
lard descent.
When the vehicle is no
longer on loop
S1 the
device will move back
up automatically after
an adjustable pause
time.
DIMENSIONS
Loops S1 and S2 also have a safety function in that they will not let the device move all the time the vehicle is on top.
ENTRY
When the vehicle is on loop S1 the
device will move down only after a
recognition command.
If the device is moving back up
and you want to lower it again the
vehicle must be on loop
S1 and then
you must activate the recognition
command.
The vehicle approaches
the reserved area.
- Connect the contact of the coil S1 receiver to input PDM.
- Connect the N.O. contact of the S2 loop receiver to input
OPEN.
- The dimensional values of the loops are only approximate.
We suggest installing the
QK-LDT metal mass detector.
*
1
1
.4
INSTALLATION D
CONTROLLED ENTRY AND AUTOMATIC EXIT
PARAMETER DATA DESCRIPTION
Functioning logic: Automatic
Special function