quiko QK-CE220BATRLE, User Manual, Page: 4 / 12

4
EXTERNAL
PHOTOCELLS
CAPACITOR
FLASHING LIGHT 230Vac
KEY SELECTOR
OPEN/CLOSE SWITCH
COMMON
STOP
SWITCH
M1
MOTOR
COMMON
OPEN
CLOSE
230V 50/60Hz
CAPACITOR
MOTOR
M2
CLOSE
COMMON
OPEN
INTERNAL
PHOTOCELLS
COMMON
NOT USED NOT USED
LAYOUT AND CONNECTIONS
JP1 Jumper for SETUP
DIP SWITCHES for SETUP
RADIO PROG.
button for
transmitters
programming
POWER TRIMMER
for Power / force
setting
BREAK TRIMMER for
Break/pause time setting
LD0 Mains supply led
LD1 Radioreceiver status led
LD2 Start signal led
LD3 Pedestrian start signal led
LD4 Internal photocell led
LD5 External photocell led
LD6 Stop signal led
LD7 Not used
LD8 Not used
LD9 Control board status led (it flashes when the
automation is moving)
Connector N° Description Type Bypass if not
used?
1-2 Antenna (1 signal, 2 screen) - -
3-5 Open/close switch and key selector N.O. NO
4-5 Pedestrian open/close switch N.O. NO
6-9 Internal Photocells. If excited this contact causes: DURING OPENING --> immediate stop of the gate
and resume opening upon removal of the obstacle. DURING CLOSING --> immediate stop of the gate
and resume opening. DURING PAUSE --> rejecting of start signals and
recharge of pause time.
N.C. YES
7-9 External Photocells. If excited this contact causes: DURING OPENING --> No effects. DURING
CLOSING --> immediate stop of the gate and resume opening. DURING PAUSE --> recharge of pause
time N.C. YES
8-9 Stop switch N.C. YES
12-14 Photocells and accessories output 24Vac 500mA - -
13-14 Electrical lock output 12Vac 15W - -
15-16-17 Motor 1 output (FIRST MOTOR TO OPEN) 230Vac single phase, connector 16 = common, connectors
15-17 motor feeding and capacitor - -
18-19-20 Motor 2 output 230Vac single phase, connector 19 = common, connectors 18-20 motor feeding and
capacitor - -
21-23 Flashing lamp output 230Vac - -
-
23-24 Control board power supply 230Vac 50/60Hz - -