QuickLabel QL-60, User Manual

Page: 144 / 158

FTP Printer Management
144 QL-30/60 User Guide
An empty folder of the FTP server will be shown.
2) Copy a label file in JScript or ZPL format to the folder of the FTP server.
Printing of the label file is started immediately. The corresponding file is deleted once the
print job is complete.
3) Close the FTP connection.
FTP Access to Storage Devices
FTP connection allows you to manage data of a storage device:
1) Establish an FTP connection with the user name ftpcard and the defined password
(Default: card).
The content of the storage device will be shown. The files are separated into several sub
folders.
2) Manage the files as necessary. When copying files to the folder, type-based sorting occurs
automatically in the sub folders.
3) Close the FTP connection.
FTP Firmware Update
FTP allows you to carry out a firmware update:
1) Establish an FTP connection with the user name ftpadmin and the defined password
(Default: admin).
An empty folder of the FTP server will be shown.
2) Copy a valid firmware file (e.g. 500_6714.cfw) to the folder.
The status of the saving procedure is shown by a progress indicator in the display. The
printer resets automatically after the update is carried out successfully.
3) Close the FTP connection.
Whether the firmware update was carried out successfully can be checked on the “Status” tab
of the web interface.