QuickLabel Kiaro! 200 User Manual Download

Page: 36 / 150

Introduction

Kiaro! 200 User Guide

Printer Details

[1]

[2]

[3]

[4]

[5]

[6]

[7]

Part

Description

Upper Unit

Open this unit when loading media, removing media jams in the
feed path, or cleaning inside the machine. This unit includes print
modules, circuit boards, and other internal components.

Operation Panel

Keys necessary for operation and LEDs to indicate the state of the
printer are provided on this panel.

Power Switch

Use this switch when the printer is scheduled to be unused for a
long period of time or when relocating the printer.

Ink Tank Door

Open this door when replacing ink tanks.

Media Delivery Slot

Media is ejected through this slot.

Manual Cutter

Use the manual cutter to cut printed labels.

Maintenance Cartridge Door

Open this door when replacing the maintenance cartridge.

Summary of Contents for Kiaro! 200























































































































































Search results

Summary of Contents for Kiaro! 200

Reviews:

Related manuals for Kiaro! 200

Brands by name

Popular brands

QuickLabel Kiaro! 200, User Manual

Search results

Summary of Contents for Kiaro! 200

Reviews:

Related manuals for Kiaro! 200

Brands by name

Popular brands