QL-800 Maintenance Utility
QL-800 User Guide
51
5
Choose the
...
button. Browse to the QL800_vX_X.upgrade file and choose
Open
.
6
Choose
Send to Printer
.
A progress indicator will be displayed and the firmware will be upgraded. When this
process is complete, proceed to the next step.
Note:
The upgrade process requires up to 25 minutes. Allow the upgrade process
to finish without interruption.
7
Power off the printer. On the rear of the printer, turn the power inlet switch off.
8
On the rear of the printer, turn the power inlet switch on. Power on the printer.
Setting the Clock
1
Launch the QL-800 Maintenance Utility.
From the Windows Start Menu, choose
Start > All Programs > QuickLabel
QL-800 > QL-800 Maintenance Utility
. A language and printer prompt will open.
Select a display language and the QL-800 printer you want to connect to. Choose
OK
.
2
Choose the
Printer Information
tab.
3
To set the date/time controls to the current date/time as defined by your Windows
clock, choose
Get Current Time
.
4
To read the time from the printer's internal clock and set the date/time controls
accordingly, choose
Read From Printer
.
5
To set the printer’s internal clock, select a date/time with the controls and choose
Save to Printer
.
Summary of Contents for QL800
Page 2: ......
Page 10: ......
Page 14: ...Contents iv QL 800 User Guide...
Page 86: ...Printer Maintenance 72 QL 800 User Guide...
