Getting Started
6
QL-800 User Guide
Before Installing the Printer
Choosing an Installation Location
The installation environment must be as described in this section.
•
The printer power cord must be able to connect to an outlet (100V - 240V AC). This
outlet must be easily accessible.
•
Avoid installing the printer near a faucet, water heater, humidifier, or refrigerator.
•
Ensure the environment temperature is within 41 to 95 degrees Fahrenheit (5 to 35
degrees Celsius). For optimal print quality, an environment temperature of
approximately 73 degrees Fahrenheit (23 degrees Celsius) is recommended.
•
Ensure the environment humidity is within 20% to 80% (non-condensing) relative
humidity. For optimal print quality, a relative humidity of approximately 60% is
recommended.
•
Avoid placing the printer in areas exposed to high temperature and humidity,
extremely low temperature, severe temperature changes, or direct sunlight.
Especially, avoid placing the printer near fire, outdoors, in distribution warehouses,
or in refrigerated areas.
•
Avoid installing the printer in areas subject to dust.
•
The room must be properly ventilated.
•
No printer feet should float. The printer must be held level constantly.
•
When placing the printer on a desk, table, or other similar surface, it must be sturdy
and stable enough to support the weight of the printer. The table must be rated for
a minimum of 100 pounds.
Summary of Contents for QL800
Page 2: ......
Page 10: ......
Page 14: ...Contents iv QL 800 User Guide...
Page 86: ...Printer Maintenance 72 QL 800 User Guide...