32
English Rev. B
Q50 R Carbon
8.2.2 Drive wheel repair
To remove the drive wheel: (Fig. 8.3 & 8.4)
•
Remove the colour insert off the drive wheel.
•
Using 2 x 4mm Hex keys, unscrew and remove 3 bolts from
the drive wheel.
•
Remove drive wheel from the wheelchair..
Note:
Reverse the process to put the wheel back on. (Tighten
bolts to 8Nm).
To remove the front castor wheel: (Fig. 8.5)
•
Using 2 x 4mm Hex keys, unscrew and remove the central
bolt from the castor wheel.
•
Remove castor wheel from the wheelchair.
Note:
Reverse the process to put the wheel back on. (Tighten
bolt to 6Nm).
Note:
Transfer colour insert over if needed to new wheel.
To remove the front anti-tip wheel: (Fig. 8.6)
•
Using 2 x 4mm Hex keys, unscrew and remove the central
bolt from the anti tip wheel.
•
Remove anti tip wheel from the wheelchair.
Note:
Reverse the process to put the wheel back on. (Tighten
bolt to 4-5Nm).
Fig. 8.3
Fig. 8.5
Fig. 8.4
Fig. 8.6
Summary of Contents for Q50 R Carbon
Page 77: ...77 Rev B Q50 R Carbon...
Page 78: ...78 Rev B Q50 R Carbon...
Page 79: ...79 Rev B Q50 R Carbon...
