QUICK7610
Operation Manual
13
1. After finishing the modification, the next step communication speed, will not be able modified by
keyboard.
2. Press “EXIT” key to exit. Now, the system has saved all parameter settings, IR window will
display:
3. After all technological parameters have been selected, press “START” key and the system
perform the set flow.
E. System instruction
1. In initial state, if the top sensor or outer sensor is broken, it displays:
If the bottom sensor is broken, it displays:
When happening above status, user must stop operating.
2. In working process ,if the temperature TC
greater than
270
℃，
system enter temperature protect,
exit working process, return initial state.
7. Technology Instruction
Note: Top and bottom Heater will be very hot during working, so please don’ touch the hot
housing parts.
Note: The laser alignment device includes a secondary laser device, so don’t see the laser
bean directly.
TC:022
℃
Tb:019
℃
ready for flow
TC: ***
℃
Tb: ***
℃
T sense error !
TC: ***
℃
Tb: ***
℃
B sense error !
Summary of Contents for QUICK7610
Page 19: ......
