background image

7

7.Operation

Air volume

Adjust the knob clockwise to increase air volume, and otherwise to decrease; do reverse
operations and the air volume will be decreased. Adjust the knob for a large scope and the
air volume can be quickly increased or decreased.

Temperature

Click the "▲" or "▼" button to increase or decrease the temperature by 1℃, and hold
down the "▲" or "▼" button to rapidly increase or decrease the temperature.

Channel

Click CH1, CH2, CH3 to select Channel 1, Channel 2, Channel 3 respectively. Long press
the Channel button to store the parameters of the current Channel.

Sleeping

Place the handle on the holder to cool. The station will enter the sleeping mode when the
temperature is less than 100℃.

8.Password Setup

The initial password is “000”. The temperature can be set under this state. If you want to
limit temperature adjustment, the password must be changed.

Enter password setting mode

1) Turn off the station press the “▲” and “▼” keys at the same time, and then turn on the
station
2) Press the “▲” and “▼” keys, and you will hear a sound “Di” before C is displayed,
then a symbol “--” appears.

Summary of Contents for 959D+

















Reviews:

Related manuals for 959D+