Quest Engineering DL4300 User Manual Download Page 92

Page: 92 / 540

DL4300 Appliance

Viewing or modifying repository details

Text Box

Description

Size

Enter the size of the repository that has to be

created.

4. Click Create.

A new storage location is added to the existing repository.

The repository is expanded to the specified size.
Parent topic

Viewing or modifying repository details

1. Navigate to the Rapid Recovery Core Console.
2.

On the icon bar, click (More), and then select Repositories.
The Repositories page appears.
The DVM Repositories pane appears.

3. From the Repositories page menu, you can perform the following general actions:

Option

Description

Add New DVM Repository

Add a new DVM repository.

Open Existing DVM Repository

Open an existing DVM repository from another Core,

which changes ownership of the repository to this

Core.
For more information, see

Opening an existing DVM

repository

Refresh

View or refresh the list of repositories.

In the DVM Repositories pane, from the

drop-down menu for any DVM repository, you can perform the

following additional actions:

Option

Description

Add Storage Location

Extend the existing repository by adding a storage

location

NOTE:

When extending a DVM repository

volume, first pause protection. Then extend

the volume, and finally, resume protection.

This action prevents a rare error that can

occur only when extending a volume

simultaneous with a specific transfer phase.

Check

Perform a repository check

Summary of Contents for DL4300





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for DL4300

Reviews:

Brands by name

Popular brands

Quest Engineering DL4300, User Manual

Search results

Summary of Contents for DL4300

Reviews:

Brands by name

Popular brands