DL4300 Appliance
Stop-ActiveJobs
494
Option
Description
-pathusername
User name for network machine. Only required
when you specify network path in parameter
-
targetpath
.
-pathpassword
Password for network machine. Only required
when you specify network path in parameter
-
targetpath
.
-version
Version of VMware Tools to use. Valid versions are:
7, 8, 9, and 10.
Example:
Export all volumes from the latest recovery point on machine 10.10.12.97 to a VM called NewVMwareVM:
>Start-VBExport -protectedserver 10.10.12.97 -vmname NewVMWareVM -ram usesourceram -targetpath D:/exports
Parent topic
Stop-ActiveJobs
The
Stop-ActiveJobs
cancels active jobs for a specified protected machine.
Usage
The usage for the command is as follows:
Stop-ActiveJobs [-protectedserver [machine name | IP address] | -core [host name]] -user [user name] -password [password] -jobtype [jobtype]
Command Options
The following table describes the options available for the
Stop-ActiveJobs
command:
Table 249. Stop-ActiveJobs command options
Option
Description
-?
Display this help message.
-all
Select and cancel events of the specified type for all
protected machines.
-core
Optional. Remote Core host machine IP address
(with an optional port number). By default the
connection is made to the Core installed on the local
machine.
-user
Optional. User name for the remote Core host
machine. If you specify a user name, you also have
to provide a password. If none are provided, then the
logged-on user's credentials will be used.
-password
Optional. Password to the remote Core host
machine. If you specify a password, you also have to
provide a user name. If none are provided, then the
logged-on user's credentials will be used.
