DL4300 Appliance
Start-ProtectCluster
484
Table 241. Start-Protect command options
Option
Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address
(with an optional port number). By default the
connection is made to the Core installed on the local
machine.
-user
Optional. User name for the remote Core host
machine. If you specify a user name, you also have
to provide a password. If none are provided, then the
logged-on user's credentials will be used.
-password
Optional. Password to the remote Core host
machine. If you specify a password, you also have to
provide a user name. If none are provided, then the
logged-on user's credentials will be used.
-repository
Name of a repository on the Core where the
protected machine's data is stored.
-agentname
Protected machine name or IP address.
-agentusername
Log on to the server to be protected.
-agentpassword
Password to the server to be protected.
-agentport
Protected server port number.
-volumes
List of volumes to protect. Values must be enclosed
in double quotes and separated by a space. Do not
use trailing slashes in volume names. For example,
"c:" or "d:".
Example:
Put volumes of a server under protection:
>Start-Protect -repository "Repository 1" -agentname 10.10.9.120 -agentusername administrator -agentpassword 12345 -agentport 5002 -volumes "c:" "d:"
Parent topic
Start-ProtectCluster
The
Start-ProtectCluster
command lets an administrator add a server cluster under protection by a Core.
Usage
Usage for the command is as follows:
Start-ProtectCluster -core [host name] -user [user name] -password [password] -repository [repository name] -clustername [name | IP address] -clusterusername [user name for cluster] -clusterpassword [password for cluster] -clusterport [port] -clustervolumes [volume names] -clusternodes [cluster nodes names and volumes]
