manualshive.com logo in svg

Quest Engineering DL4300, User Manual

The Dell DL4300 Deployment Manual is available for free download at manualshive.com. This comprehensive manual provides step-by-step instructions on the setup and installation of the DL4300, ensuring a smooth deployment process. Download your free copy today and maximize the potential of your Dell DL4300.

Share
Download
background image

DL4300 Appliance

About restoring volumes from a recovery point

328

You cannot restore a volume that contains the operating system directly from a recovery point, because the

machine to which you are restoring is using the operating system and drivers that are included in the restore

process. If you want to restore from a recovery point to a system volume (for example, the C drive of the agent

machine), you must perform a Bare Metal Restore (BMR). This involves creating a bootable image from the

recovery point, which includes operating system and configuration files as well as data, and starting the target

machine from that bootable image to complete the restore. The boot image differs if the machine you want to

restore uses a Windows operating system or a Linux operating system. If you want to restore from a recovery

point to a system volume on a Windows machine, see 

Performing a bare metal restore for Windows machines

. If

you want to restore from a recovery point of a system volume on a Linux machine, see 

Performing a bare metal

restore for Windows machines

.

Finally, in contrast to restoring entire volumes, you can mount a recovery point from a Windows machine, and

browse through individual folders and files to recover only a specific set of files. For more information, see

Restoring a directory or file using Windows Explorer

. If you need to perform this while preserving original file

permissions (for example, when restoring a user’s folder on a file server), see 

Restoring a directory or file and

preserving permissions using Windows Explorer

.

The topics in this section describe information about restoring data on physical machines. For more information

on exporting protected data from Windows Machines to virtual machines, see 

VM export

.

 

NOTE: 

When recovering data on Windows machines, if the volume that you are restoring has Windows

data deduplication enabled, you will need to make sure that deduplication is also enabled on the Core

server.

Rapid Recovery supports Windows 8, Windows 8.1, Windows 10, Windows Server 2012, and Windows

Server 2012 R2 for normal transfers (both base and incremental) as well as with restoring data, bare metal

restore, and virtual exports.

For more information on the types of volumes supported and not supported for backup and recovery, see

Support for dynamic and basic volumes

.

Parent topic  

About restoring volumes from a recovery point

You can restore the volumes on a protected machine from the recovery points stored in the Rapid Recovery Core.

 

NOTE: 

In previous releases, this process was referred to as performing a rollback.

 

NOTE: 

Rapid Recovery supports the protection and recovery of machines configured with EISA partitions.

Support is also extended to Window 8, Windows 8.1, Windows Server 2012, and Windows Server 2012 R2

machines that use Windows Recovery Environment (Windows RE).

You can begin a restore from any location on the Rapid Recovery Core Console by clicking the Restore icon in

the Rapid Recovery button bar. When you start a restore in this manner, you must specify which of the machines

protected on the Core you want to restore, and then drill down to the volume you want to restore.
Or you can go to Recovery Points page for a specific machine, click the drop-down menu for a specific recovery

point, and then select Restore. If you begin a restore in this manner, then follow this procedure starting with 

Step

5

.

If you want to restore from a recovery point to a system volume, or restore from a recovery point using a boot

CD, you must perform a Bare Metal Restore (BMR). For information about BMR, see 

Understanding bare metal

restore for Windows machines

, and for prerequisite information for Windows or Linux operating systems, see

Prerequisites for performing a bare metal restore for a Windows machine

 and 

Prerequisites for performing a

bare metal restore for a Linux machine

, respectively. You can access BMR functions from the Core Console as

described in the roadmap for each operating system. You can also perform a BMR from the Restore Machines

Wizard. This procedure will direct you at the appropriate point in the wizard to the procedure 

Performing a bare

metal restore using the Restore Machine Wizard

.

Summary of Contents for DL4300





























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DL4300

Eastwood 31652 Instructions Manual preview
31652
Brand: Eastwood Pages: 8
Buffalo MiniStation HD-PF320U2 Specifications preview
MiniStation HD-PF320U2
Brand: Buffalo Pages: 2
Qsan Technology XCubeNXT XN8012D Hardware Manual preview
XCubeNXT XN8012D
Brand: Qsan Technology Pages: 69
Stardom SA2TB3 Quick Setup Manual preview
SA2TB3
Brand: Stardom Pages: 2
SimpleTech Zeus IOPS Product Manual preview
Zeus IOPS
Brand: SimpleTech Pages: 84
Apricorn Aegis Bio 3.0 Quick Start Manual preview
Aegis Bio 3.0
Brand: Apricorn Pages: 4
OCZ IBIS HSDL 3.5 Datasheet preview
IBIS HSDL 3.5
Brand: OCZ Pages: 3
Décor et Jardin 62380S829 Assembly Notice preview
62380S829
Brand: Décor et Jardin Pages: 24
Glyph GT103800-1000 Manual preview
GT103800-1000
Brand: Glyph Pages: 7
Icy Box IB-RD2253-U31 User Manual preview
IB-RD2253-U31
Brand: Icy Box Pages: 24
SonicWALL 01-SSC-1954 Installation Manual preview
01-SSC-1954
Brand: SonicWALL Pages: 2
Quantum Fireball LCT20 Specifications preview
Fireball LCT20
Brand: Quantum Pages: 2
Palram Skylight Shed-6x5 Assembly Instructions Manual preview
Skylight Shed-6x5
Brand: Palram Pages: 56
TrailFX 160481 Manual preview
160481
Brand: TrailFX Pages: 5
MicroNet PlatinumRAID Ultra320 Owner'S Manual preview
PlatinumRAID Ultra320
Brand: MicroNet Pages: 73
Drazice NADO Manual preview
NADO
Brand: Drazice Pages: 27
NetApp DS2246 Installation And Service Manual preview
DS2246
Brand: NetApp Pages: 74
PQI Traveling Disk U250 User Manual preview
Traveling Disk U250
Brand: PQI Pages: 20

Brands by name

Popular brands

Load more brands