DL4300 Appliance
Changing the Local Mount Utility options
148
Option
Description
Use specific credentials
Select this option if the credentials you use to
access the Core are different from your Windows
credentials.
User name
The user name used to access the Core machine.
NOTE:
This option is only available if you
chose to use specific credentials.
Password
The password used to access the Core machine.
NOTE:
This option is only available if you
chose to use specific credentials.
4. Click Connect.
5. If adding multiple Cores, repeat all steps as necessary.
Parent topic
Changing the Local Mount Utility options
Complete the following procedure to change the options for all Rapid Recovery Cores connected to the LMU.
1. From the Local Mount Utility user interface, click Options.
2. In the Options dialog box, you can change the setting described in the following table.
Table 52. Core settings
Option
Description
Default mount point repository
Use the Browse button or enter a path to the location
you want to use for mounting recovery points.
Use my Windows user account credentials
Select this option to always use your Windows
credentials by default when logging in to a Core.
Use specific credentials
Select this option to use the following credentials for
each connected Core:
•
User name: Enter the user name to use for all
Cores.
•
Password: Enter the password to use for all Cores.
Core connection timeout (sec)
Enter the amount of time the LMU should continue
trying to connect to a Core before the connection
times out (in minutes : seconds : milliseconds).
