Quest Engineering 151052-32 User Manual Download Page 44 | Manualshive

Page: 44 / 58

background image

Rev 1. 1 05/08/19

- 39 -

TELSEC

©

MP2 User Guide

9.4

Alarm Programming

Select Alarms from the Program menu to see the alarm program screen. This screen will display all
programmed alarms in a table with the ability to navigate the table using the next, back, beginning and
end buttons. In addition, the page has filter options to display all alarm points or just those associated
with the direct inputs or Modbus ports. The filter section will also allow you to search based on the
alarm name or the name of the point used in the alarm. For example, to see all Tower alarms, you can
type Tower in the name field and press enter. Now only alarms with the word Tower in the name will be
displayed.

The alarm names are hyperlinks that when selected will bring up the program alarm window. The same
window is used for new alarms when selecting the Add new alarm button.

Figure 52 - Program alarm page

«
...
42
43
44
45
46
...
»

Summary of Contents for 151052-32



























































Reviews:

No comments

Related manuals for 151052-32

Brand: IEI Technology Pages: 187

Brand: IEI Technology Pages: 71

3C410012A - OfficeConnect Remote 531 Access...

Brand: 3Com Pages: 72

Brand: SMART Pages: 15

Avenue Express Control Panel

Brand: Ensemble Designs Pages: 19

Sentry Global Security Modem

Brand: Server Technology Pages: 22

Supero SAS-826A

Brand: Supero Pages: 16

Brand: Garderos Pages: 23

Brand: Macsense Pages: 13

Brand: TP-Link Pages: 7

Speed Touch 591s

Brand: Alcatel Pages: 184

Brand: Xenya Pages: 189

Brand: B+B SmartWorx Pages: 52

ZyXEL ZyAIR B-120

Brand: ZyXEL Communications Pages: 20

Brand: Kohler Pages: 32

Brand: UfiSpace Pages: 34

Brand: Idis Pages: 17

IGS-5225-20T4C2X

Brand: Planet Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands