Smart LTE Module Series
Smart EVB G2 User Guide
Smart_EVB_G2_User_Guide 10 / 59
2
General Overview
Quectel supplies Smart EVB G2 for designers to develop applications based on Quectel SC60 module.
This EVB can test basic functionalities of the module.
Key Features
2.1.
The following table describes the detailed features of Smart EVB G2.
Table 1: Key Features
Features
Implementation
Power Supply
DC power supply: 4.75V~6.0V (typical: 5.0V)
VBAT: 3.55V~4.4V (typical: 3.8V)
LCM Interfaces
Two 5-inch 1280
×
720 HD resolution LCDs
4-lane MIPI DSI interface for each LCD
Touch Panel Interfaces
Two capacitive touch panels
Camera Interfaces
Support two cameras:
Rear camera supports 16M pixels with 4-lane CSI interface
Front camera supports 8M pixels with 2-lane CSI interface
USB Interface
USB type-C interface
Compliant with USB 3.0 and 2.0 specifications, with transmission rates up
to 5Gbps on USB 3.0 and 480Mbps on USB 2.0.
Support USB OTG
Used for AT command communication, data transmission, software
debugging and firmware upgrade
Audio Interfaces
Analog Input:
3 groups of analog microphone inputs, integrating internal bias voltage.
One headset input
One ECM-type microphone input
One MEMS-type microphone input
Analog Output:
3 groups of analog audio outputs, including:
One stereo headset output
One mono earphone differential output
