Quectel SC690A Series Hardware Design Download

Page: 78 / 110

Smart Module Series

SC690A_Series_Hardware_Design 77 / 105

5.1.3. Reference Design

The module provides main and Rx-diversity RF antenna interfaces for antenna connection.

It is recommended to reserve a

π-type matching circuit for better RF performance, and the π-type

matching components (R1/C1/C2, R2/C3/C4) should be placed as close to the antenna as possible. The

capacitors are not mounted by default.

ANT_MAIN

R1 0 R

Module

Main
antenna

R2 0 R

Diversity
antenna

ANT_DRX

Figure 30:

Reference Circuit for RF Antenna Interfaces

5.2. GNSS

The module integrates the

IZat™ GNSS engine (Gen 8) which supports multiple positioning and

navigation systems including GPS, GLONASS, BeiDou and so on. With an embedded LNA, the module

provides greatly improved positioning accuracy.

Summary of Contents for SC690A Series















































































































Search results

Summary of Contents for SC690A Series

Reviews:

Related manuals for SC690A Series

Brands by name

Popular brands

Quectel SC690A Series, Hardware Design

Search results

Summary of Contents for SC690A Series

Reviews:

Related manuals for SC690A Series

Brands by name

Popular brands