LTE Module Series
M.2 EVB User Guide
M.2_EVB_User_Guide 35 / 37
5.5.
Power off the Module
There are two ways to power off the module.
⚫
Hardware shutdown: Switch the S103 to
OFF
state, the module will be powered off.
⚫
Software shutdown: Turn off the module using
AT+QPOWD
command.
Please refer to
document [2]
for details about
AT+QPOWD
command.
5.6.
Test Current Consumption
The M.2 EVB can also be used to test the current consumption of the module after making the following
modifications.
1.
Remove R607.
Figure 27: Location of R607
NOTE
