GNSS Module Series
L80&L80-R&L86&LC86L EVB User Guide
L80&L80-R&L86&LC86L_EVB_User_Guide 20 / 30
5
Using PowerGPS
In this chapter, you can find out how to use PowerGPS, a tool for checking the status of GNSS receivers,
when you are working with your EVB.
5.1. COM and Baud Rate Setting
Step 1:
After EVB accessories are assembled, turn on the EVB and start PowerGPS (
PowerGPS Trial
2.3.5 is used
as an illustration in this document). After the tool is started, the following interface is
displayed with 6 default windows.
Figure 12: PowerGPS Interface (Not Connected)
Step 2:
At the bottom of the interface, select a correct
COM port
and
baud rate
(the modules support
9600 bps by default), then click the button
“
Create Connection
”. The following interface is
shown when the module is connected.
