Quectel BG96 Developer'S Manual Download

Page: 23 / 90

Installing AnyNet IRIS

Before you begin

To configure AnyNet IRIS you need:

• AWS Marketplace Customer ID

• AWS IAM user credentials

Installing AnyNet IRIS for Windows 10

1. On the AnyNet IRIS Welcome page, select:

The AnyNet IRIS Setup.exe downloads.

2. Run

AnyNet IRIS Setup <

version

>.exe

, where <

version

> is the latest version.

Depending on your Windows security, a warning may appear. Ensure that you run the

AnyNet IRIS Setup <version>.exe

app anyway.

AnyNet IRIS installs and opens.

3. Next, configure AnyNet IRIS.

For more information, see

Configuring AnyNet IRIS

on the next page.

Installing AnyNet IRIS for macOS

1. On the AnyNet IRIS Welcome page, select:

The AnyNet IRIS-<

version

>.dmg file downloads.

2. Double-click

AnyNet IRIS-<

version

>.dmg

, where <

version

> is the latest version.

3. Drag the AnyNet IRIS icon into the

Applications

folder.

4. In the

Applications

folder, double-click the AnyNet IRIS application to open it.

5. Next, configure AnyNet IRIS.

For more information, see

Configuring AnyNet IRIS

on the next page.

Eseye-enabled Quectel BG96 module Developer Guide v1.8

Installing AnyNet IRIS

Summary of Contents for BG96



























































































Search results

Summary of Contents for BG96

Reviews:

Related manuals for BG96

Brands by name

Popular brands

Quectel BG96, Developer'S Manual

Search results

Summary of Contents for BG96

Reviews:

Related manuals for BG96

Brands by name

Popular brands