background image

GV600WG User Manual 

QSZTRACGV600WGUM0102                                                                                                            3 

2.

 

Product Overview 

2.1.

 

GV600WG Products 

Table 3.

 

Product Model 

Model No.  Region 

Technology 

Operating Band (MHz) 

GV600WG 

Worldwide 

HSPA/UMTS/GSM 

GSM/GPRS: 850/900/1800/1900 
HSPA/UMTS: 
850(B5)/900(B8)/1900(B2)/2100(B1) 

2.2.

 

Parts List 

Table 4.

 

Parts List 

Name 

Description 

GV600WG Locator 

135*62*38 mm 

User Cable

 

GV600WG standard cable [Optional accessory] 

USB Configure Cable   

USB to TTL serial port [Optional accessory] 

Power & GND Cable   

GV600WG Power &GND Cable [Optional accessory] 

 

2.3.

 

Interface Definition 

The  GV600WG  Tracker  has  an  18-pin  interface  connector  which  contains  the  connections  for 
power,  I/O,  TTL,  etc.  The  sequence  and  definition  of  the  18-pin  connector  are  shown  in  the 
following figure: 

 

Figure 1.

 

The 18-pin Connector on the GV600WG 

Table 5.

 

Description of 18-pin Connections 

Index 

Description 

Comment 

PWR1 

Primary Power 8-32V 

PWR2 

Secondary Power 8-32V 

AGND 

Primary Analogue Ground 

AGND 

Secondary Analogue Ground 

IGN 

Ignition Detection Input, Positive Trigger 

ADIN1 

Analogue Input 0-32V 

OUT_3V3 

External Accessory Power 400mA Max 

GND 

External Accessory Ground 

Summary of Contents for GV600WG



















Reviews: