GV55LITE User manual
TRACGV55LITEUM001
- 15 -
Table 8.
Electrical Characteristics of Ddigital Outputs
Logical State
Electrical Characteristics
Enable
<1.5V @150mA
Disable
Open drain
Figure 10.
Typical Connection with Relay
Figure 11.
Typical Connection with LED
Note:
1 - OUT1 will latch the output state during reset.
2- All outputs are internally without pulled up to PWR pin by a diode. So an external
flyback diode is needed when the output is connected to an inductive load.
Queclink
Confidential