background image

GL300W Manage Tool User Guide                                                          

 

TRACGL300WMT001

        

                                                   

            - 4 -   

2.

 

GL300W Manage Tool Interface 

GL300W  manage  tool is PC  software which can be used to configure GL300W  through 
Data_Cable_M or USB Cable. It is easy for the backend server developers to configure GL300W 
with manage  tool, which  has  friendly user interface.  The correct command  messages  sent  to 
GL300W  will  be  displayed  on  the manage tool.  (These messages can also be sent by SMS or 
UMTS ).   
 
The administrators  can also use the manage  tool to configure GL300W  before selling. But it is 
strongly recommended to establish a backend server and implement the way to control GL300W 
by SMS or UMTS. Please refer to “

GL300W @Tracker Air Interface Protocol

” for detail. 

 
Before using the manage tools please find “Queclink_WCDMA_USBDriver_V1.00” in develop suit 
and install the driver. After that a new COM port can be found in the PC system, and then please 
follow the steps as below: 
1.

 

Power on GL300W.   

2.

 

Connect GL300W to PC with USB Cable or DATA_CABLE_M. 

3.

 

Run “

Queclink GL300W_Manage_Tool_Vx.xx.exe

”. 

 

2.1.

 

System Requirements 

In order for this manage tool to run on your computer, you must use it in below operating 
system: 

 

Windows 98SE; 

 

Windows ME Windows 2000 SP4; 

 

Windows XP SP2 and above (32 & 64 bit); 

 

Windows Server 2003 (32 & 64 bit); 

 

Windows Server 2008 (32 & 64 bit); 

 

Windows Vista (32 & 64 bit); 

 

Windows 7 (32 & 64 bit); 

 

Windows 8 (32 & 64 bit); 

 
Supported System Environments: 

 

Microsoft .NET Framework 2.0 or higher 

Queclink 
Confidential

Summary of Contents for GL300W























Reviews: