GB100MG User Manual
TRACGB100MGSUM001
- 6
1. Introduction
The GB100MG Lite is a device designed for self-installation by a customer. It simply
mounts directly onto the vehicle’s battery with only two wires to attach. This approach
allows for either a very low cost installation or for the insurance customer to self-install. Its
built-in GNSS receiver has very high sensitivity, a fast time to first fix and supports 10 Hz
location sampling during vehicle motion. Their multiband LTE Cat-M1 and Cat-NB1 allow
the GB100MG Lite location to be monitored in real time or periodically tracked by a
backend server and mobile devices. Its built-in 3-axis accelerometer allows motion
detection, 100 Hz* pre/post incident data collection. System integration is straightforward
as complete documentation is provided for the full featured @Track protocol. The @Track
protocol supports a wide variety of reports including emergency, geo-fence boundary
crossings, and scheduled and compressed GPS position.
1.1.
Reference
Table 1. GB100MG lite Protocol Reference
SN Document name
Remark
[1] GB100MGL @Tracker Air Interface Protocol
The air protocol interface between
GB100MG Lite and backend
server.
