QUBINO ZMNHHD1, User Manual

Page: 54 / 58

EN .
54
16. Z-Wave Command Classes
ROOT DEVICE:
GENERIC_TYPE_SWITCH_MULTILEVEL (in Switch mode it changes to
GENERIC_TYPE_SWITCH_BINARY)
SPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL (in Switch mode it changes to
SPECIFIC_TYPE_SWITCH_BINARY)
Supported Z-Wave Command Classes:
COMMAND_CLASS_ZWAVEPLUS_INFO_V2,
COMMAND_CLASS_SUPERVISION_V1,
COMMAND_CLASS_TRANSPORT_SERVICE_V2,
COMMAND_CLASS_SECURITY_V1,
COMMAND_CLASS_SECURITY_2_V1
COMMAND_CLASS_VERSION_V2 [S0]* [S2]*
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 [S0]* [S2]*
COMMAND_CLASS_POWERLEVEL_V1 [S0]* [S2]*
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 [S0]* [S2]*
COMMAND_CLASS_SWITCH_BINARY_V1 [S0]* [S2]*
COMMAND_CLASS_SWITCH_MULTILEVEL_V3 [S0]* [S2]* (only present in Dimmer mode)
COMMAND_CLASS_METER_V4 [S0]* [S2]*
COMMAND_CLASS_NOTIFICATION_V5 [S0]* [S2]*
COMMAND_CLASS_ASSOCIATION_V2 [S0]* [S2]*
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 [S0]* [S2]*
COMMAND_CLASS_CONFIGURATION_V1 [S0]* [S2]*
*[S0] Security Command Class
*[S2] Security S2 Command Class